Solar cable Manufacturers Bring Tips For Making Right Connections For Best System Performance

Solar Cables ManufacturersHow poor-quality and wrongly installed inverter cables and battery affect the solar system? Ever wonder Solar Cable Manufacturers always advice to keep the battery based system in good condition and get installation services from experts only? It is because such bad practices can cause troubles in the function and safety of any battery based system. This is why it is important to select the right cables and install them in right way.

It is a perception of the people that battery and inverter cables are costly and it is a tempting place to cut costs, but getting cheap cables can significantly affect the performance of the inverter and batter based system. It will feel like having old tires on a high performance car. In other words, you save money, but you cannot ensure great performance and safety.

You have facility to purchase preassembled cables or simply get them book at online website. The thing is that you cannot build them yourself until you know how to do it. The details are important to know-
•    Battery cables and their ring terminal connectors carry high power current.
•    Battery cables and their ring terminal connectors are used in harsh environments where they can encounter sulfuric acid, high temperatures, hydrogen gas, and different metals.

For battery and inverter system, the largest conductors in the system are used for connecting all of the batteries and then exiting the battery box in order to connect to the inverter. As manufacturers mainly intend all battery-based inverters in a way that users can operate them at 48 VDC or lower, they need large cables to handle high currents without critical losses. The sizes of these cables are influenced by the voltage of the battery.

To connect the components of solar system, you may need to use right sized wire to ensure low energy loss and to keep away possible damage from overheating and fire.
Once you connect the solar panels to the input terminals, you can use the same sized wire for connecting the charge controller output to the batteries. Such wires will be located closer to the batteries.

There are many other points to remember. You can browse the tips shared by Solar Cables Manufacturers online. For this post, you can share your reviews with our readers. You can also send queries related to solar cables and other wires and cables.


Some Safe Work Practice Tips Shared by Power Cable Manufacturers


At the unit of power cable manufacturers, there are certain responsibilities shared by people to perform safe work practice with dedication. There is a manager health, safety and environment that is responsible for maintenance and ownership of this standard. Then there is Manager training that train the staff. Others are authorized persons who comply with this standard.

There are certain works that you can perform with high voltage transmission cables i.e. it will be necessary to have the HV cable isolated. The type of work includes-

  • Work on gas or oil cubicles and external pipe work if there is any risk of draining of oil from the cable. Loss of oil will affect the cable insulation integrity.
  • Connection and reading of pressure gauges along a route of cable will be needed during work in order to determine the oil leakage area. The readings are accurate when the cable is in a stable thermal condition that you can obtain with the cable off load.
  • If you are using modern cables, it is suggested that the cable be isolated even for casual movements. Take it as a suggestion only; we are not forcing you to implement it.

What are the work procedures?

Workers who are making maintenance practices for cable follow certain work procedures that are as under-

  • They make request for access with the cable isolated to access form with LV. If quick recall is needed for system reasons, some arrangements should be made to ensure workers will be available.
  • If further work is not required the LV access authority should be void and the cable must be returned to service.
  • It is the responsibility of the controller to check the further work requirements with field workers and make apt arrangements accordingly.

It is critical when developing safe working procedures to precisely make assessments regarding hazardous voltage rises at work site, and where required give a thought to these basic safe working principles-

  • While working on high voltage cable conductor, bonded earth mat working conditions should be employed by the workers. If it is not possible, they should adopt insulated working conditions.
  • One should not introduce remote earths to the local work site mat situation.
  • One should keep the conductors (being worked) as short as possible by disconnecting phase conductors and / or sectionalisation of cable sheath.
  • To maximize the shielding effect, one should maximize the number of continuous and earthed parallel conductors.

These are the considerations followed by power cable manufacturers when they deal with high voltage cables. For more details, you can anytime contact to proficient manufacturing team and ask your questions.

How do the Elevator cables perform?



Elevators make life easy for everyone. And the most popular elevators that have been helping people save time and energy for decades now are the cable-run elevators. The elector cables are to be appreciated here for doing the job right and having us all reach heights or lows in just a matter of seconds.

Cable elevators function on a basic principle where the elevator raises with a traction caused by a cable looped sheave which is in turn linked to an electric motor. As the motor starts turning one side, the elevator raises and when the motors turns the other way, the elevator is lowered. And all these are housed in one machine box that is above the elevator shaft.

Elevator cables play an important role in the functioning of the elevators which are more versatile and efficient as compared to the hydraulic ones.

Now, one thing that we should note is that the elevator cables are designed specially to withstand high amounts of mechanical stress and interestingly, they are a part of the world’s fastest and highest elevators.

Most of the elevators function through flat elevator cables which are approximately in between 80 meters to 400 meters long depending upon the height of the building or number of floor the elevator has to reach.

Elevator cable is an important connection that links the elevator and the controller; and in the traditional elevators, the power and signal data in carried through the cable that travels.

All types of lift cables are easy to install and they come with a spectrum of designs to choose and they priced differently based on the materials used.

Most buyers prefer procuring lifts that run on elevator cables for they are durable, reliable and can be manually operated easily during power cuts for people to get off it.

And when it comes to choosing the best design or type of the elevator cable, the whole decision revolves around cost-effectiveness and reliability.

Now according to the market figures, the flat type is relatively lesser than the round cables as the flat ones can form smaller loops than the round ones. And therefore, flat ones are preferred where the loop clearance has minimal space. On the other hand, when it comes to achieving the right number of conductors, flat ones are to be combined several times and the single ones can be combined just by a single round. Therefore, apart from just the cost-effectiveness, the flat cables and the round cables are to be chosen according to the elevator construction position and the space available for the cable loops.

Elevator cables manufacturers in India have grown to be experts in providing exclusive designs to the buyers and the installation has become all the more simple as compared to the earlier times.

Although the manufacturers have a lot of information to bombard the buyer with, it’s important that an elevator contractor naturally has greater knowledge of which material is to be used so as to ensure that the utility of the elevator is at its best.


Everything About Control Cables In India And How They Are Different From Power Cables

jpg1Control cables in India play a vital role in the electronics industry. These are the utmost essential components for process automation.

Known for their exclusivity, flexibility and durability, the utility of control cables in India specially lines up at almost a spectrum of electronic items.

Generally made up of class 5 copper conductors and steel that is available in the galvanized form facilitating a strong confront to mechanical faults, the control cables in India and elsewhere also are technically termed as multimode cables.

Thoroughly intensified with PVC insulation and a transparent yet strong PVC sheath, the control cables are easy to use and any unexpected damages can be identified within no time.

Control cables in India are made in different varieties to serve various industrial purposes and the basic ones are the Round Wire Control Cable and the Flat Strip Armoured Control Cables.

Also let us understand various types of these cables and their utility.

PVC Control Cables


PVC control cables, theoretically polyvinyl chloride cables, are the most preferred cables among various varieties of control cables that are available in the Indian market. They are flexible and extremely durable and their utility is scaled specifically to medium mechanical strain. And the advantage of using these cables is that they are versatile at operation in various weather conditions be it dry or wet or moist environmental scenarios. These cables are comparatively easy at installation front and are definitely reasonable cost wise. Considering their versatility, they are used in air conditioners and other relative electronic appliances which require something within them to withstand any harsh environmental conditions.

Special PVC control cables are different to that of the general PVC control cables. Right from the color to their functioning they are different. Colored in black, these PVC cables are in great demand in different parts of the globe with specific reference to Eastern, South-European and Arabian nations. However, one disadvantage of these cables is that they are not compatible to underwater circumstances.

PUR Control Cables


PUR cables, theoretically Polyurethane cables, are mostly used in the machinery arena. With the utility of these cables extending from different machine tools to control systems to linking of control panels and other heavy industrial machinery, the PUR cables come with a mark of superior quality and exclusivity, for they are demanded to be extremely resistant to anything that may cause a hindrance in the industries. For instance, mineral oils or synthetic oils or ultraviolet radiation or water based coolants or anything relative to these. The PUR cables are one of the elite products in the industrial sector that can easily adapt to any harsh conditions.

Single Core Cables


Just like the multicore cables that are known for reliability and durability, these single core one also are highly flexible and their utility is more in drag chains. This cable has a greater demand and value in the international market as it is exceptionally preferred in the exporting industries, in the designing of robots and other machinery parts that are automated.




Will The Recycling of PVC Cable Waste Benefit Exporters

Recycling of PVC Cable Waste

When we use the word ‘recycling’, sudden thoughts come across – what, how, why. The term recycling is magical and delivers benefits to environment in every way. There is no particular thing for which recycling word is invented. It is meant for everything – be it your book, glasses, laptops and PCs, or wires. PVC cables exporters explain that recycling of pvc cable waste requires energy input. Yes, production of stuff do requires energy and recycling is one of such processes. Saving materials are easy to outline, but you need to work on it and prepare clear report of all the energy used and transformed in each process involved in recycling.

It is true that every step of recycling needs energy to separate or purify a material. To determine the winner in the race of ‘recycling the junk’ and ‘producing the new’, there are some great raft of things to consider.

Take an instance of cable wire. Most of the electric cable wires have a copper wire jacketed with PVC insulation. Recycling of copper definitely makes sense because it is a non-renewable metal found on earth. Mining of copper may involves tons of energy and force that will cost more. With recycling option, you can save energy, time, and money. So, recycling option is a clear winner, indeed. What about PVC? You should know that production of PVC is not done through mining. Resins from which PVC is made are extracted through processing of crude oil and chemically transformed into PVC.

Gathering old cables and forwarding them to recycling department, then washing and melting them requires time investment and loads of energy, since trucks and industrial plants and transformers usually run on fossil fuel. So, what is the best thing to do? Of course it is PVC recycling, and not PVC production process.

Though, the process of recycling seems complex, but technology has made everything so easy and convenient for people. Today, engineers have released programs that make recycling easy to perform. The software swiftly models the process and makes it reliable option for the person.

PVC cables exporters recommend recycling of pvc cable waste to save energy and time. It is the best way to conserve environment and fossil fuel. Do you agree to their perspective? Do you have your perspective to share? We won’t mind if you share it with us.